Free ShippingDenali Pro Series UTV Plow Blade
Our team of engineers designed a "Cadillac" plow at a reasonable price so you don't have to skimp on quality to save money. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV, preventing damage to the front end or other vehicle parts from sudden impact.
Please Note that winch mounts manufactured by Warn & KFI for the Honda Pioneer 700 are not compatible with the Denali Plow Mount.
- County-style blade (One side of the blade is higher and tapers down) with curved design cuts wet snow & throws powder out of your path; made of 12 gauge steel
- Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar, to handle accidental impact
- Sand-blasted powder coat with epoxy primer and TGIC Polyester top coat for ultimate corrosion protection, UV resistance and long lasting durability Available in red, yellow and black
- (1) High strength, high yield 3/16" thick Grade 50 Reversible steel wear bar for maximum durability
- Angle Blade ranges from 16" on the low side to 23" on the high side
- Rubber flap stabilizer bar with upgraded (stiffer) rubber flap material which prevents snow from flying over the blade
- Plow markers included
- Height AND Angle Adjustable Premium steel skid feet
- Includes 3 Year Warranty on the plow blade against manufacturer defect
- Entirely compatible with All MotoAlliance UTV Plow Systems
- Designed in the USA
DENALI UTV Plow Push Tubes
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 5 different angles - 0, 12.5°, 25°
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick Release Pins included
- Extended Push Tubes are designed to be used with SxS/UTVs that have snow tracks
Fully compatible with Denali Pro and Standard Plow Systems.
DENALI UTV Pushtube Lift Kits bolt directly to existing DENALI UTV Standard Pushtubes (NOT DENALI UTV Extended Pushtubes) to accommodate for oversize tires and lifted UTV and SxS machines. It is important that the pushtube height matches the height of the machine to allow the plow blade to sit level on the ground.
DENALI UTV Plow Pulley Kit
Designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, thus extending the life of your plow lift system.
- For use with either a steel or synthetic cable
- Drop in replacement for standard or wide spool fairleads
- standard spool bolt pattern: 3" x 4 7/8" (4.875" between fairlead holes)
- wide spool bolt pattern: 3" x 6.67" (6.0" between fairlead holes)
- Constructed of black powder coated 7 gauge steel
- Two (2) roller heights for different fairlead heights and angles
- Includes hardware and instructions
- Save your longer winch cable for recovery purposes and add a 6ft AmSteel®-Blue DENALI Plow Cable
DENALI Pro Series UTV Plow Mount
Our DENALI Pro Series UTV Plow Mounts by MotoAlliance are made from 100% laser cut 1/4" steel. The custom slotted holes allow your blade to hug the ground while the overall design of the side walls are formed from the body which maximizes the strength of the mount. All other components of the plow mount are then welded together to create one impact resistant mount.
Please Note: the silver Quick Release Pins are not included with the purchase of a DENALI plow mount plate. They are included with the DENALI UTV Pushtubes of any DENALI Plow System..
DENALI UTV Snow Plow Hydro-Turn
Our DENALI Professional Series UTV Snow Plow Hydro-Turn System makes quick work of turning snow plow blades and holds fast when hitting even the biggest snow banks. It allows you to turn your snow plow side to side hydraulically without getting off your machine.
- Top of the line Parker hydraulics system with built in relief valve overload protection
- Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid; no chance of leaks!
- Change the blade angle while driving; full radius turn in just 5 seconds!
- Heavy duty chrome plated 3/4" cylinder shafts
- Two bolt installation of hydraulic cylinder and pump
- No modifications necessary - bolts directly to the Denali Pro Series UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
- Backwards compatible with manual turning system
- Overload protection at 4,000lbs of extension force and 3,500lbs of retraction force
- Includes 3 year Warranty
Hydro-Turn Components:
- Pre-assembled hydraulics package
- Mounting Brackets
- Contactor
- Wiring Harness
- Rocker Switch
- Installation Instructions
Our shipping department processes shipments on weekdays between 9am and 4pm Eastern time. We try and ship most products within 24-48 hours of the order being processed. Some items may take a little longer to ship due to seasonality and some of our products are custom made/built upon order. Each product is listed in red on the product page how long it takes to ship out.
If an item is on back order, we will notify you via a phone call or email.
Tracking numbers for processed orders are typically provided within 72 hours of being available. We do not process any orders on Saturday or Sunday.
You may receive multiple tracking code emails depending on the quantity of item(s) ordered.
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
-We ask for your year, make and model at the end of you order. We try our best to check all orders for fitment as a courtesy, but it is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
