Free ShippingKFI Snow Plow Kit for Tracker UTV
Choose your supported Tracker, then a 60-, 66- or 72-inch steel or poly blade. Every kit includes KFI Pro 2.0 square push tubes 106300 and your model-matched front plow mount. A working winch is required to lift the blade; use yours or select a confirmed added-winch package.
What comes in the base kit?
- KFI Pro 2.0 UTV push tubes — 106300.
- Your matched Tracker plow mount with installation hardware.
- Your selected steel or poly blade. Poly blades include markers and a rubber top flap.
Vehicle fitment, grouped by mount
2020–2022 Tracker 500S — KFI 106790 + required 101370 bracketThe vehicle package includes plow mount 106790 and required winch/fairlead bracket 101370 once, even if you use an existing winch. KFI lists both 105920 and 106790 for this model; this kit uses 106790 to keep selection simple. Installation requires drilling and may require fascia trimming. Wide winches are not compatible with this plow setup.
Mount 106790 installation (PDF ↗)opens in a new tabRequired bracket 101370 installation (PDF ↗)opens in a new tab2020–2025 Tracker 800SX / Crew; 2021–2025 LE / LE Crew — KFI 106000Plow mount 106000 includes a lower 2-inch receiver. LE and LE Crew require revision C; their brush guard may interfere. Confirm guard clearance before ordering. Standard 800SX and Crew offer added-winch packages with 101670; LE models use your installed winch until added-winch fitment is confirmed.
Mount 106000 revision C installation (PDF ↗)opens in a new tab2020 Tracker SVX1000 — KFI 105815The stock front bumper is required. Use your suitable installed winch; call to confirm any replacement-winch fitment.
Mount 105815 installation (PDF ↗)opens in a new tabNot offered: XTR1000, Tracker ATV models or any year/model outside this chart. A winch mount alone does not confirm plow fitment. Lifts, larger tires, tracks, forward A-arms and aftermarket bumpers require confirmation.
Winch setup and lift geometry
A winch is required to lift the blade. Added 3500 lb packages include the UTV-DRS-K dash switch kit; its $42.50 price is included. Added 800SX/Crew packages include 101670 mounting hardware; Crew packages also include UTV-WEK wiring extensions. Existing mounting hardware is not charged twice within the package. Check fairlead, rope/cable routing and electrical instructions for your installation.
KFI marks 500S for a pulley matched to the winch line: 106680 for standard steel cable or 106745 for standard synthetic rope. This optional control defaults to No pulley and is separate from the standalone 811000 seasonal plow strap. No blanket 106140 strap-roller recommendation is made. Follow KFI’s fairlead instructions; synthetic winches may need a suitable synthetic roller fairlead rather than a hawse. Installation-specific fairlead conversions are not included.
Optional upgrades
- 811000 plow strap: standalone seasonal lifting strap, separate from cable/rope pulleys.
- Power-angle actuator: adjusts blade angle from the cab. Manual angling requires stopping, exiting the cab and releasing the angle lock. The winch still raises and lowers the blade.
- 106322 leveling kit: optional for confirmed geometry with small lifts or oversized tires; check KFI mounting-height guidance.
- Markers and side shields: markers already come with poly blades. Choose shields for your blade material.
Installation PDF downloads
Pro 2.0 push tubes 106300 (PDF ↗)opens in a new tab800SX winch mount 101670 installation (PDF ↗)opens in a new tab1–2-inch leveling kit 106322 (PDF ↗)opens in a new tabCommon questions
Is the 500S bracket optional?No. KFI requires 101370 for this plow mount. It is included once with your 500S vehicle selection, even with an existing winch.
Are markers included?Yes with poly blades; optional with steel blades.
How do I choose a blade width?Measure outside tire width and compare it with angled clearing width in the KFI visualizer. Replace the default 64-inch value with your measurement.
Plow angle & width visualizer
KFI plow angle & width visualizer
See how angling the blade narrows the path it clears. Measure across the outside edges of your tires, including wheel offset. The default tire width is 64 inches; enter your actual measurement.
KFI’s Pro 2.0 push tubes have three blade positions: straight, 25° left and 25° right. Use this tool to compare widths, then choose your blade in the Plow Builder.
1.3″ total geometric clearance. Allow for real-world turning and snow conditions.
Estimated clearing width = blade width × cos(working angle). This illustrative top view explains width geometry; it does not establish vehicle fitment or installation clearance. Blade shape, tire size and setup affect actual results.
Our shipping department processes shipments on weekdays between 9am and 4pm Eastern time. We try and ship most products within 24-48 hours of the order being processed. Some items may take a little longer to ship due to seasonality and some of our products are custom made/built upon order. Each product is listed in red on the product page how long it takes to ship out.
If an item is on back order, we will notify you via a phone call or email.
Tracking numbers for processed orders are typically provided within 72 hours of being available. We do not process any orders on Saturday or Sunday.
You may receive multiple tracking code emails depending on the quantity of item(s) ordered.
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
-We ask for your year, make and model at the end of you order. We try our best to check all orders for fitment as a courtesy, but it is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
