Free ShippingKFI Complete Snow Plow Kit for Yamaha Wolverine
The kit includes KFI Pro 2.0 square push tubes (106300), the front mount matched to your Wolverine, and your choice of a 60-, 66- or 72-inch steel or poly blade. Poly blades include markers.
Have an RMAX? See the Yamaha Wolverine RMAX plow kit.
Vehicle fitment
KFI 105695 · Wolverine and early X2 / X4
- 2016–2018 Wolverine / R-Spec / SE
- 2019 Wolverine X2 / R-Spec / SE
- 2018–2019 Wolverine X4 / SE
Includes the required KFI 101515 mounting plate once, even with your installed winch. Mount 105695 has a lower 2-inch receiver and requires drilling the plastic skid plate.
Mount 105695 installation (PDF · opens in a new tab)Required mounting plate 101515 installation (PDF · opens in a new tab)KFI 106145 · 2020+ X2 / X4
- 2020–2026 Wolverine X2 850
- 2024–2026 Wolverine X2 1000
- 2020–2026 Wolverine X4
Uses the integrated Yamaha winch mounting location. Follow the instructions for the included skid plate.
Mount 106145 installation (PDF · opens in a new tab)Confirm fitment before ordering for aftermarket bumpers, lifts, oversized tires, tracks or forward A-arms.
Winch and optional upgrades
A winch is required to raise and lower the blade. Use a compatible installed winch. For earlier machines using 101515, optional KFI Assault winches use the included plate. The wide AS-50WX requires drilling the OEM bumper flange. Both 3500 lb choices include the UTV-DRS-K dash switch. For 2020–2026 X2 and X4 models, contact us to confirm replacement winch fitment with the integrated mount.
Optional upgrades include the 811000 seasonal plow strap, in-cab power angling, side shields and a 1–2-inch leveling kit for compatible setups.
Installation PDFs
Pro 2.0 push tubes 106300 (PDF · opens in a new tab)Optional 1–2-inch leveling kit 106322 (PDF · opens in a new tab)Plow angle & width visualizer
KFI plow angle & width visualizer
See how angling the blade narrows the path it clears. Measure across the outside edges of your tires, including wheel offset. The default tire width is 64 inches; enter your actual measurement.
KFI’s Pro 2.0 push tubes have three blade positions: straight, 25° left and 25° right. Use this tool to compare widths, then choose your blade in the Plow Builder.
1.3″ total geometric clearance. Allow for real-world turning and snow conditions.
Estimated clearing width = blade width × cos(working angle). This illustrative top view explains width geometry; it does not establish vehicle fitment or installation clearance. Blade shape, tire size and setup affect actual results.
Our shipping department processes shipments on weekdays between 9am and 4pm Eastern time. We try and ship most products within 24-48 hours of the order being processed. Some items may take a little longer to ship due to seasonality and some of our products are custom made/built upon order. Each product is listed in red on the product page how long it takes to ship out.
If an item is on back order, we will notify you via a phone call or email.
Tracking numbers for processed orders are typically provided within 72 hours of being available. We do not process any orders on Saturday or Sunday.
You may receive multiple tracking code emails depending on the quantity of item(s) ordered.
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
-We ask for your year, make and model at the end of you order. We try our best to check all orders for fitment as a courtesy, but it is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
